Достоинства ворот

Advantages and disadvantages of sliding and swing gates ⠀

What does the owner of a country house think about when choosing an entrance gate? ⠀
❓ which type of design is better !? ⠀
⠀
Consider examples of questions from our customers: ⠀
⠀
🗣 As I understand it, the advantages of sliding gates - there is practically no need to clean the snow. They take up less space on the site, they are not skewed, like oar. But swinging, it seems, is cheaper. Tell me which gate is better? ⠀
⠀
One of the customers thinks that swing gates are more reliable than sliding gates. They practically do not require maintenance. It’s easier to install automatic drives on them. ⠀
⠀
🗣 To open the swing gates in winter, you have to remove the snow. I will redo the gate to the sliding. Tired of cleaning snow. ⠀
⠀
Opinions are divided. How to be? ⠀
⠀
@energo_doma : ⠀
Both sliding and swing gates are reliable and safe when they are correctly installed. Each type has its own characteristics. During the use of swing gates, because their doors open outwards or inwards, more free space is required. Sliding gates move along the fence. Accordingly, it is not necessary to clean the snow to open the wings, which saves the usable area of the site.
⠀
About Width: ⠀
⠀
The standard opening width for the gate is 4 m. Modern manufacturers offer gates that cover openings up to 5 m wide. There are situations when gates of a smaller or larger width are needed. It is more convenient to select a gate for a specific site if the manufacturer can make the structure in increments of 5 mm in height and width. ⠀
⠀
💡 By the way, to block a wide opening (up to 9 meters), you can put oncoming sliding gates. ⠀
⠀
The optimal dimensions of the gate are largely influenced by the width of the access road and the dimensions of the equipment. For example, the width of KAMAZ is 2500 mm excluding mirrors. In a straight line, a three-meter goal is quite enough. If the width of the road is less than 4 meters, the truck will have to enter the gate at an angle. Therefore, in some cases, a five-meter goal is not enough. ⠀
⠀

Выбираем ворота

Choose a gate for a country house

⠀ Today, the market offers different entrance gates: simple and low-cost without automation and modern, which open and close using the remote control. The gates are welded or prefabricated. To fill ⠀
Sashes are also available in many different materials. Which gate to choose? ⠀
⠀
Before ordering a gate, you need to understand their design. So you understand the principle of the gate and make an informed choice. ⠀
⠀
☝🏻Hinged gates ⠀
Depending on the design of the swing gates, the doors open outwards - onto the street, or inwards - into the yard. The filling of the wings is also different. It can be a profiled sheet, wood or more modern and durable materials: extruded profiles, sandwich panels or rolling profiles. ⠀
⠀
☝🏻 Now consider the sliding gates. ⠀
⠀
Classic sliding gates are self-supporting. ⠀
At the base of the gate is a tire that moves with the help of roller bearings (manually) or an electric drive (automatically). The leaf of sliding gates, as well as swing gates, can have different filling - profiled sheet, boards, aluminum and rolling profiles, sandwich panels, etc. ⠀ ⠀
✍🏻And in the next post we will talk about the advantages and disadvantages of sliding and swinging ⠀
gate ⠀
⠀
🔶 If you decide to change the old gate, write to us @energo_doma⠀⠀
⠀ ⠀⠀⠀ ⠀⠀
Call: ⠀⠀ ⠀⠀
📲 +7 919 777-98-94⠀⠀ ⠀⠀
(WhatsApp, Telegram, Viber) ⠀⠀ ⠀⠀
Or write to us in Direct :) ⠀⠀

Оригинальное освещение

Original site lighting

Original site lighting. Handmade.

⠀⠀
Prices for garden lights may make some doubt the need for decorative lighting of the site. But turning on your imagination and finding some free time you can use materials at hand and create original fixtures with your own hands. Here are just a few options. ⠀
⠀⠀
🍾 Lamps from glass bottles ⠀
⠀⠀
1⃣ The simplest option: put a Christmas garland in a bottle of an interesting shape. If you take a battery-powered garland, you can use an impromptu lamp away from the outlet. Instead of a garland, you can use a flashlight inserted in the neck, and fill the bottle with beads or transparent reflective beads ⠀
⠀⠀
2⃣ At the bottom of glass jars you can pour sand, pebbles, colored stones and put candles. Outside, the jar can be decorated with rope, fabric, lace, etc. ⠀
⠀⠀
3⃣ A shade from a glass bottle of an unusual shape or color is made by cutting the bottom. This is not difficult: you need to tie the bottle with thread soaked in kerosene at the level where you want to make the cut, and pour cold water into the bottle to the same level. It remains to set the rope on fire, taking care of its own safety - the cut will be even, but if desired, it can be polished a little. Now it’s small: fill the bottle with an electric cord, connect the cartridge and screw in the bulb ⠀
⠀⠀
4⃣ The inner surface of the cans can be painted with fluorescent paints, making spots of different shapes and sizes. In the evening, a composition of several cans will look very original. ⠀
⠀⠀
💡 About other cool ways in the next posts! ⠀
⠀⠀
🔶 If you seriously decide to start lighting your site @energo_doma⠀
⠀ ⠀⠀⠀ ⠀
Call: ⠀⠀ ⠀
📲 +7 919 777-98-94⠀⠀ ⠀
(WhatsApp, Telegram, Viber) ⠀⠀

Автоматизация освещения

Automation of turning on and off country lamps

⠀🤔 You should think about how the lights on the site will be turned on and off, agreed upon? It will be simple and even pleasant for someone to independently carry out the on / off procedure every day, but with a large area of the site, and the countryside you are not only in good weather, this regular activity can turn into a real problem. As a solution - automation of the lighting system, and there are several options for implementing this story: ⠀
⠀ ⠀
💢 Twilight relay control. ⠀
It will turn on the lighting when the sensor installed on the site “realizes” the onset of twilight, and turn it off at dawn. The sensor is mounted in any convenient place on the territory, the relay is installed in the electrical panel ⠀
⠀ ⠀
💢 Control using an astronomical relay. In this case, an additional sensor is not needed - you only need to adjust the coordinates of the area once, and thanks to the built-in microprocessor, the time of sunset and sunrise at a certain time of the year will be calculated. You can additionally configure not to turn on the light when there is no one on the site. ⠀
⠀ ⠀
💢 Operation with a time relay. A simple and not very functional option. It only configures the time after which the light will be turned off after it is manually turned on. Suitable for those areas where there are few light sources. Suppose a relay is configured, according to which after 5 minutes the light must be turned off. The owner of the site, arriving in the evening at the cottage and turning on the lighting near the gate manually, may not return to turn it off - the light itself will turn off after a specified time. ⠀
⠀
⭕ In addition, at least one of all the lamps in the country should be equipped with a motion sensor. When someone passes within the range of the sensor, the light will turn on. This is very convenient if you tend to come to the cottage in the evening - no flashlights and matches are needed. In addition, it is an additional protection against intruders.

Уличные светильники

Types of Street Lights

The whole huge variety of fixtures designed to illuminate the suburban and suburban area can be divided into several groups: ⠀
⠀⠀
💡 Floor lamps, which include lights of different heights ⠀
💡 Wall lights are used to illuminate a house or fences, they can be hung on the wall at any height ⠀
💡 Pendant lights include lanterns and garlands that can be hung from tree branches or ceilings in gazebos ⠀
💡 Spotlights with a directed light beam are installed, as a rule, at ground level and serve to illuminate those areas that need to be allocated on the site (house, beautiful tree, fountain, etc.) ⠀
💡 Indirects or lights with a reflector direct the light flux down, so they are used to illuminate garden paths and flower beds кл
💡 Fiber optic fixtures stand out in a separate group due to their unique properties and versatility of application. ⠀
⠀⠀
🔶 If you seriously decide to start lighting your site @energo_doma⠀⠀
⠀⠀⠀
Call: ⠀⠀⠀
📲 +7 919 777-98-94⠀⠀⠀
(WhatsApp, Telegram, Viber)

Виды светильников

Types of lamps for the site

The main types of lamps for the site

⠀⠀
🔅 The illumination of the site in addition to what should look stylish and beautiful should not lead to significant expenses for the use of electricity. Traditional incandescent lamps are far from the most economical option, they heat up very much during operation, which consumes most of the energy, quickly burn out, and even explode at low temperatures. There are many alternatives to such lamps today: ⠀
⠀⠀
🔸 Halogen and fluorescent lamps - more economical and durable. ⠀
⠀⠀
🔸 LED lamps and tapes do not heat up, spend a minimum of energy, shine brightly enough, and confidently beat competitors in terms of durability. Moreover, when using this type of fixtures, it will be possible to easily change the brightness of the lighting. Usually, with the help of LEDs, they create decorative lighting, arranging the hidden illumination of ponds, steps, benches, the facade of the house or hiding them in the crown of trees or shrubs. ⠀
⠀⠀
🔸 Fiber optic systems - an innovation in garden lighting. They can be used as sources of primary or secondary light, for architectural lighting and even for decorating pools and ponds. The system consists of a projector (light source for optical fiber), an optical cable or fiber, a common input, threaded nozzles, and various terminal devices. And it turns out that if you have only one generator, you can provide lighting with a large area. The main advantages of the system are simplicity in management, durability, efficiency and the absence of requirements for waterproofing fixtures. ⠀
⠀⠀
🕎 I would also like to note such interesting modern solutions for lighting the garden as paving slabs with LEDs mounted in it and fluorescent tiles with the ability to accumulate solar energy in the daytime.

Декоративное освещение

Decorative and functional site lighting

⠀🔅 Functional lighting. ⠀
Its tasks are simple and clear. If decorative lighting is used far from every suburban area, then it is impossible to do without general lighting. When illuminating all important elements in order to increase the safety of movement around the territory, it is worth remembering that accents in lighting should be put on arbors, patios, houses and other buildings - garden paths should not be flooded with too bright light, otherwise walking along them will experience great discomfort. The most illuminated place on the site is the facade of the house and the porch: it will be more comfortable to move from less lighted areas to brighter. It is important that even late at night functional lighting allows you to see the boundaries of the site. ⠀
⠀
✳ It is also necessary to highlight bridges, stairs, borders and other most dangerous objects. Along the tracks, the luminaires must be evenly spaced. The light sources can be lanterns, floor lamps with diffusers made of frosted glass, bright spotlights, spherical lamps and other elements. ⠀
⠀
🔅 Decorative lighting ⠀
It is necessary for recreation areas and objects that you want to admire even after dark. Typically, flower beds, trees, shrubs, fountains, ponds, alpine slides, garden sculptures, as well as arbors, patios and benches are provided with additional illumination. Decorative lighting complements the main and gives a dim light, creating a romantic and slightly mysterious atmosphere. There are a lot of ways to organize it - it all depends on the style of the site and the owner’s imagination. ⠀
⠀
✳ In order not to be mistaken with the choice of style of fixtures for the site, you can use a simple rule. The more elaborate and many-sided landscape design of the garden, the more simple and concise should be the lighting items. If the style of the site is close to minimalism, then you can use lamps of the most bizarre and non-standard forms, focusing on decorating the garden on them.

зонирование пространства магазина⠀

Zoning store space ⠀

Correct zoning of store space ⠀
⠀
🏬 In any store ⠀
a huge role is played by the correct zoning of space. When zoning, known facts should be taken into account, for example: 80-90% of people entering a store turn right and then go along the right wall. It is proved that 60% of sales are carried out at the entrance. Therefore, it is on the right that the news of the season should be posted - the most fashionable and exclusive models. Simpler goods are best placed at the back of the store, so that on the way to them the visitor must see the newest and most expensive clothes offered by the store and buy it. Именно
⠀
👫 An important point: clothing stores in most cases are self-service establishments. This must be taken into account when creating a trading space. From the point of view of the security system and order in the sales area, it is important that the entire premises are viewed by the store manager. Therefore, a special place in any store is a cashier. The next, no less critical area is the fitting rooms. They need to be placed in such a way that it is convenient for customers, and the free space in the corner of the trading room is rationally used. The passage to the dressing room should be convenient, and the space in it should be free for the location of all the personal belongings of the buyer. It is at the stage of creating the store’s project that it is necessary to correctly select the sizes of the fitting rooms and their place in the retail premises. Fitting rooms should be in the seller’s area of view. ⠀
⠀
💸 Correct zoning of the retail space is a guarantee that the visitor will become a buyer. An important success factor is both the first impression of shopping, and the convenience of choice, which can be ensured by the correct zoning. Designing each store individually is truly an art, but still general trends can be identified. In the first zone there are new items and the best things. Usually, this space occupies a third of the trading floor. In the second part, it is recommended to place casual clothes, and in the third - youth clothes are usually placed. The rule for all zones is ⠀
types of clothing should not be mixed.

Гармонизация торгового пространства⠀

Harmonization of retail space

It affects the interior - the type of store and the brand that will be sold. When zoning, the choice of commercial equipment and general merchandising - the area of the store is also very important. In stores where a small room is reserved for a warehouse, this issue is especially relevant. Another important point is the height of the ceilings, since when designing store lighting, low ceilings can limit the possibilities for lighting design. Correctly directed and bright light plays an exceptional role for the convenience of choosing clothes by the buyer. These issues should be considered even at the stage of choosing a retail space. ⠀
⠀
🏛 In spacious stores, the creativity of the designer’s thinking is not limited to square meters. That allows you to create custom and interesting ⠀
interiors. This approach is typical of boutiques and branded stores. The main message is exclusivity, which obeys the entire retail space, furniture, lighting, color solutions, window dressing, signage, advertising and printing products. ⠀
⠀
In large stores, they harmonize space in this way: ⠀
⠀
🔸 Alternate front and side signs ⠀
🔸 Racks are compactly located in the center of the trading floor ⠀
🔸 Properly select the ratio of the calculation and sign of the goods ⠀
🔸 Use a large number of mannequins ⠀
🔸 And enough convenient dressing rooms ⠀
⠀
🏷 Stock stores are the trade of stocks and unsold lots of goods from old collections, and their design is a different approach. The purpose of such a store is to sell warehouse stocks and goods that are no longer bought or bought very poorly in ordinary stores as quickly as possible. In such trading floors there are no special requirements for design and creativity, unusual conceptual solutions and original designs. In stock stores, interest in buying is stimulated ⠀
not retail equipment and the interior, but big discounts. But the main thing here is not to overdo it. After all, the stock store is not a second-hand, but an institution in which very high-quality clothes of famous and popular brands are sold.

Расстановка мебели

Arrangement of furniture and equipment

Effective arrangement of furniture and retail equipment for stores. ⠀
⠀
👀 Choosing retail furniture are oriented to the type of store. In boutiques and branded stores, they attach particular importance to the quality and exclusivity of equipment. The emphasis is on the unity of the product and the environment in which the clothes are presented. One conclusion: in expensive stores - expensive equipment. ⠀
⠀
👁 The basic rule for the efficient arrangement of equipment in large stores, without a shortage of retail space, ⠀
It is convenient buyer access to goods, when at one glance you can cover a large number of clothes. The assortment must be neatly and correctly laid out / hung. Please note that the layout of clothes and shoes, for stores of this type, ⠀
should not be too tight - this creates inconvenience for the buyer who wants ⠀
get the goods you are interested in. ⠀
⠀
💳 In stock stores, it’s important to create a functional and convenient trading room with inexpensive trading equipment and furniture that can accommodate a large number of clothes and shoes. ⠀
⠀
☑ Create convenience for the buyer, it is important that it is convenient to choose and measure. ⠀
⠀
The buyer should choose clothes from a wide range without complications. The main thing is that all goods are viewed and all clothes are arranged by categories and sizes. When designing the interior of the store ⠀
carefully consider the zoning of goods by category, visibility ⠀
signage and calculations. Also, the product must logically be placed on shelves: ⠀
women's clothing is separate from men's clothing, and trousers should not hang over T-shirts, for example. ⠀
⠀
🛍 Trading equipment should provide convenience of choice. For example, jeans are best placed on shelves with cells and special tables for presentation, where one copy of all the models is presented, so that the buyer can better evaluate and consider the goods. And shirts are often placed on racks with drives, on the lid of which is a sample of the model, and the drive contains the product itself in different sizes. ⠀